Numark M4 DJ-mikseri

Hinta: 122,00

Toimitusaika: 1-4 päivää
Tälle tuotteelle toimituskulut alk. 4,00 € (Postipaketti)

Määrä: kpl

Numark M4 DJ-mikseri

M4 Three-Channel Scratch Mixer

Numark-logo

- Kolme kanavaa

Sisääntulot:
- kaksi kpl phono/linja (RCA)
- neljä kpl linja (RCA), mic (1/4")

Ulostulot:
- Master (RCA)
- Record (RCA)
- headphone (1/4" stereo)

- Kolmialueinen EQ joka kanavalla
- Mikrofonisisääntulo EQ:lla
- Vaihdettava crossfader, slope control


M4 Three-Channel Scratch Mixer

Bonus Inputs For Total Performance.


Overview

M4 is a three-channel tabletop mixer designed for any DJ who needs maximum flexibility.
It features a replaceable crossfader with reverse and slope controls, a 1/4" microphone input with EQ, and plenty of routing for phono and line level devices.

Where M4 really shines is its impressive input section.
Two switchable phono/line inputs plus four more dedicated line inputs give you a total of SIX inputs!
Add Master and Record outputs, and steep three-band EQ/rotary kills on each channel, and you've a powerhouse package that's ready to handle whatever the gig throws at you.

M4 has the inputs, controls, and features to turn what would be a problem for the average mixer into a simple plug-in.
Don't get stuck without enough inputs at your next gig.
Upgrade to M4 – you'll be glad you did!


Key Features

- Three-channel tabletop mixer
- Inputs: two phono/line switchable (RCA), four line (RCA), mic (1/4")
- Outputs: Master (RCA), Record (RCA), headphone (1/4" stereo)
- Steep three-band EQ/rotary kills on each channel
- Microphone input with EQ
- Six-segment LED display for monitoring signal strength
- Toggle for master and PFL metering
- Replaceable crossfader with reverse and slope controls


Tech Specs

Inputs
- Line: 10K ohm input impedance; 80mV RMS sensitivity for 0dB output
- Mic: 600 ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input
- Phono: 47k ohm input impedance; 1.3mV RMS sensitivity @ 1kHz for 0dB output

Outputs
- Line: 7V RMS max
- Headphone: 0.5W into 47ohm

Signal to Noise Ratio (maximum output JIS-A weighted):
- Line: Better than 100dB
- Mic: Better than 95dB
- Phono: Better than 85dB

Distortion: Less than 0.05%

Frequency response:
- Line: 20 – 20,000 Hz ±0.5dB
- Mic: 20 – 15,000 Hz ±0.5dB
- Phono: ±1dB; -3dB attenuation at 20 Hz to reduce rumble and feedback

Channel Equalizer:
- Bass: +12 / -35dB at 20 Hz
- Mid: +12 / -25dB at 1.3 kHz
- Treble: +12 / -20dB at 15 kHz

Channel fader kill: Better than 90dB at 1 kHz

Crossfader kill: Better than 75dB

Crosstalk: Better than 80dB at 1 kHz

Arvostele tämä tuote

Tälle tuotteelle ei ole vielä annettu arvosteluita.